Back to products

Brush lath

With their flexible combinations of materials, punching patterns and appearances, lath brushes offer an unlimited range of possibilities.

  • Common standard sizes in stock
  • Filling materials and drill patterns tailored to your application
  • Worn brush laths are easy to replace
  • Suitable for a multitude of applications
Configure product Help needed? Get in contact
Configure product
Array ( )

Remove filters

Back to configurator






Back to brush data

Current brush consumption: *

Go to step 2
Go to step 2 Specific request Other sizes? Place a specific inquiry
Specific request

      Do you use brushes?*  

      Regularity:*  



           Contact:*     


    By clicking submit, you consent to us storing your data and contacting you. We will not share your data with third parties. Read our Privacy Policy here.

    Description

    The combination of materials is very flexible which results in a product with many different appearances and application possibilities. Brush laths are very suitable for the sealing of parts or machines and protect them from moist, water, dirt and vermin. But it is also used for guiding, transporting, pressuring and making the product rough.

    Dependent on the applications and the profile of the brush laths, the lengths can vary from a few centimeters up to 6 meters. The widths and the drilling pattern are variable.
    In the daily practice it appears to be that many problems ask for the same sort of solution. That is why we keep our standard brush laths continuously in stock.

    High-demand applications, which cause brush laths to wear above average, require a specially developed brush. For this purpose we have the brush laths with a C-profile in our product range. This brush is quick and easy to replace. The C-profile is only purchased once and fixed in position. The brush laths can be replaced by simply sliding them in and out of the profile. Besides the normal brush lath, you can choose from brush laths with a profile or from brush laths with an aluminium holder.

     

    Back to products

    Configuration

    Use the parameters below to configure your desired brush lath. Is the correct dimensioning not listed? Then choose a specific request.

    Are you unsure or do you need advice?

     

    Parameters

    • L Length
    • B Profile width
    • B1 Profile holder width
    • H Profile height
    • H1 Profile holder height
    • VM Filling material
    • VD Bristle diameter
    • ZH Visible hair length

     

    Materials

    • PA6.12 Polyamide 6.12
    • PA6.6 Polyamide 6.6
    • PP Polypropylene

    The models shown are standard. For other specifications, please contact our sales team.
    Not quite sure or need some advice?

    BLK0607

    6 x 7 mm (b x h)

    Brush lath
    BLK0607

    6 x 7 mm (b x h)

    Borstellat - BLK0607 - KOTI

    The models shown are standard. For other specifications, please contact our sales team.

    BLK0810

    8 x 10 mm (b x h)

    Brush lath
    BLK0810

    8 x 10 mm (b x h)

    Borstellat - BLK0810 - KOTI

    The models shown are standard. For other specifications, please contact our sales team.

    BLK0820

    8 x 20 mm (b x h)

    Brush lath
    BLK0820

    8 x 20 mm (b x h)

    Borstellat -BLK0820 - KOTI

    The models shown are standard. For other specifications, please contact our sales team.

    BLK1425

    14 x 25 mm (b x h)

    Brush lath
    BLK1425

    14 x 25 mm (b x h)

    Borstellat - BLK1425 - KOTI

    The models shown are standard. For other specifications, please contact our sales team.

    BLK1515

    15 x 15 mm (b x h)

    Brush lath
    BLK1515

    15 x 15 mm (b x h)

    Borstellat - BLK1515 - KOTI

    The models shown are standard. For other specifications, please contact our sales team.

    BLK1535

    15 x 35 mm (b x h)

    Brush lath
    BLK1535

    15 x 35 mm (b x h)

    Borstellat - BLK1535 - KOTI

    The models shown are standard. For other specifications, please contact our sales team.

    BLK1550

    15 x 50 mm (b x h)

    Brush lath
    BLK1550

    15 x 50 mm (b x h)

    Borstellat - BLK1550 - KOTI

    The models shown are standard. For other specifications, please contact our sales team.

    BLK2008

    20 x 8 mm (b x h)

    Brush lath
    BLK2008

    20 x 8 mm (b x h)

    Borstellat - BLK2008 - KOTI

    The models shown are standard. For other specifications, please contact our sales team.

    BLK3515

    35 x 15 mm (b x h)

    Brush lath
    BLK3515

    35 x 15 mm (b x h)

    Borstellat - BLK3515 - KOTI

    The models shown are standard. For other specifications, please contact our sales team.

    BLK5015

    50 x 15 mm (b x h)

    Brush lath
    BLK5015

    50 x 15 mm (b x h)

    Borstellat - BLK5015 - KOTI

    The models shown are standard. For other specifications, please contact our sales team.

    BLK10015

    100 x 15 mm (b x h)

    Brush lath
    BLK10015

    100 x 15 mm (b x h)

    Borstellat - BLK10015 - KOTI

    The models shown are standard. For other specifications, please contact our sales team.

    Applications

    Industrieën

    Are you interested in how our brush solutions could optimise your process?